Weighing; Configuring A Task: My Weighing - Sartorius cubis MPS Quick Reference Manual

Weighing

D
Create
Weighing
Please check the weighing parameters in
this Select task:
Task a New a Weighing a Overview
Stable conditions
Adapt filter:
Final readout
Application filter:
Stability: Exact center
Stability delay: Short delay
Zero/tare function: After stability
Back Wizard Done
You can change the name of the task if
desired:
Task a New a Title
Task title:
My Weighing
Task description:
Basic weighing
Back Cancel
®
42 Cubis MPS Quick Reference Guide
6 Weighing
Purpose
Weight determination within the scope of the device-specific weighing capacity
(see "Technical Data")
Combination Options
"Mass Unit Conversion" and "Individual Identification"
6.1

Configuring a Task: My Weighing

t
If you have not already done so, switch over to Task Management and touch
Edit
y You can create, modify, copy, and delete a task profile.
t
Touch Create
t
Select the application for the task profile, in this case
If you want to set up the weighing function without combining it with another
application:
y The settings for
t
Check all settings and change them as required.
t
Touch .
Next
y The settings for the
t
Check all settings and change as required.
t
Touch Next .
t
If you are an administrator: Define whether all or only certain users may use this
Next
task.
t
Touch .
Next
t
Enter a short name and a description for the new task (e.g., "Pipette calibration").
t
To save the new task, touch
Save
.
are displayed.
Weighing
are displayed.
Printouts
.
Save
Edit .
Weighing .