Creating New Tasks (Configuration) - Sartorius cubis MPS Quick Reference Manual

Task Management
®
36 Cubis MPS Quick Reference Guide
5.3

Creating New Tasks (Configuration)

The following applications are included in the Cubis
software. You can configure them as tasks according to your requirements and
preferences:
− Weighing
− Mass unit conversion
− Individual identifiers
− Density determination
− Draft shield (optional)
− Individual Q-App Workflow
The basic process for task configuration is as follows:
1. Create a new task.
2. Select application.
3. Complete all following prompts and if applicable make own entries for the
required parameters.
4. If applicable, perform steps 2 and 3 for additional applications if you would like
to combine multiple applications.
5. Check settings for the weighing and for the printouts, and modify as required.
6. If you are an administrator, define whether the new task can be used by all or
only by certain users.
7. Enter a name and description for the new task.
8. Save task.
®
pipette calibration system