Configuring A Task: Climate Control; Creating New Limits For The Internal Climate Module - Sartorius cubis MPS Quick Reference Manual

Climate control
Climate control
Climate control Administrator
| Climate control
03/01/2016 14:45:33
[Start] Climate control
Limits for internal climate module
Limits for external climate module
Limits for water temperature
Basic settings
End
Limits for internal climate module
Climate control Administrator
| Intern. climate module
03/01/2016 14:45:33
Min. rel. air humid.:
Max. rel. air humid.:
Back
Please enter the minimum Administrator
relative air humidity.
03/01/2016 14:45:33
Back
7.3

Configuring a Task: Climate Control

D
t
If you haven't already done so, go to Task Management.
y
The task selection is displayed.
t
Touch the task of your choice or:
t
If the desired task is already selected, touch
Start
y
The main menu for pipette calibration is displayed after a few seconds. If you are
logged on as an administrator, you can see the following menu items:
−
[Start] Climate control
−
Limits for internal climate module
climatic conditions (min./max. humidity) within the weighing chamber
(see page 47)
− Limits for external climate module
climatic conditions (min./max. air temperature, air pressure, relative humidity)
for the ambient environment (see page 48) if an external climate module
(climate tower) is connected
Start
− Limits for water temperature
temperature (min./max.) within the container for the calibration medium
(see page 48) if an external climate module (container for the calibration
medium) is connected
− Basic settings
application (see page 49)
−
Import/export data
SD card
y
If you are logged on as a user without rights (e.g., "assistant"), the buttons for
functions which you do not have rights to use are grayed out and inactive.
7.3.1

Creating New Limits for the Internal Climate Module

You can define the values for the minimum and maximum air humidity within the
weighing chamber for the internal climate module.
t
In the menu for the "Climate Control" application, select
climate module
y
The entered limits for the internal climate module are displayed.
25.0
%
95.0 %
Save
t
Enter the desired limits for the minimum and maximum air humidity as a
percentage.
t
Touch OK .
25.0
%
OK
"Climate Control" Application
Start
: Start task
: Display and enter limits for
: Display and enter limits for
: Display and enter limits for water
: Define general settings for the "Climate Control"
: Access data from an SD card and save data to an
.
®
Cubis MPS Quick Reference Guide
.
Limits for internal
47