Sartorius cubis MPS Quick Reference Manual page 7

Risk of damage to equipment due to voltage discrepancies!
If the voltage rating printed on the AC adapter does not match the local grid voltage, this can lead to damage to
equipment.
t
Note the voltage rating specified on the AC adapter.
t
Ensure that the voltage of the AC adapter and the local grid voltage match.
Equipment damage due to condensation!
If the device is moved from a cool environment to a warm environment, electronic components may be damaged
by condensation.
t
Allow the pipette calibration system to acclimatize for approx. 2 hours before it is connected to the power
supply and operated.
Equipment damage due to penetration by liquids!
Liquid penetration can damage the electrical components.
t
Make sure that no liquid gets into the housing.
t
Do not leave the device in humid areas.
Equipment damage through opening the housing or AC adapter!
Opening the housing of the pipette calibration system or AC adapter can cause damage to the components, and
the verification seal is broken. This invalidates the warranty.
t
Do not open the pipette calibration system.
t
Do not open the AC adapter.
t
The pipette calibration system and AC adapter may only be opened by specialized personnel trained by
Sartorius.
Equipment damage due to electrostatic charge!
Electrostatic charge may compromise the function of the pipette calibration system.
t
Keep the pipette calibration system away from objects that generate an electrostatic charge.
t
Observe the additional safety precautions and hazard warnings in subsequent chapters.
Safety Instructions
®
Cubis MPS Quick Reference Guide 7