Load Program From Tu (F1-Service); External Reference Volume; Network Settings - Sartorius Sartocheck 4 plus Operating Instructions Manual

7.19.1 Hardware Configuration
(F1-Service)
Fig. 7-62 | Service Menu: Hardware configuration

7.19.1.1 External reference volume

Fig. 7-63 | Service Menu: Hardware configuration

7.19.1.2 Network settings

Fig. 7-64 | Network setting
54 Operation
F1: External reference volume
F2: Network settings
F3: Test unit address allocation
F5: PLC interface test
In the hardware configuration, the volume for the external reference tank for each
test unit is set separately.
The external reference tank function is only valid for the Filter tester.