Settings For The Upper Draft Shield Panel; Menu - Sartorius cubis MPS Quick Reference Manual

System Settings (Menu)
Device parameters
Draft shield
Please check the draft shield parameters:
Menu a Draft shield a Overview
Left/right key: Separate function
Automatic mode: Off
End of beep: Off
Back Wizard
Please select the function of the left/right
key:
Menu a Draft shield a Overview a Left/right key
Off, no function
Same function
Separate function
Please select the automatic mode:
Menu a Draft shield a Overview a Automatic mode
Off, no function
Close –> function –> open
Close -> function
®
28 Cubis MPS Quick Reference Guide
4.5.12 Settings for the Upper Draft Shield Panel ("Draft Shield" in the Menu)
The functions of the keys can be set here. The following settings are defined
manually on the upper draft shield panel.
t
In the
Device parameters

Menu

Here you can define settings for:
− Left/right key
− Automatic mode
− End of beep
Save
t
Define the functions for the left and right keys.
− Off, no function
− Same function
−
Separate function
OK
t
Define the automatic mode for the upper draft shield panel.
−
Off, no function
−
Close –> function –> open
automatic mode while the function is executed, and then re-opened.
− Close -> Perform function
closed in automatic mode while the function is executed.
OK
If the automatic mode is switched on, the sliding upper draft shield panel
automatically closes when the pipette calibration system is switched to standby.
menu, touch
Draft shield
: The keys have no function.
: Both keys have identical functions.
: This setting does not work.
: The automatic function is switched off.
: The upper draft shield panel is closed in
: The sliding upper draft shield panel is
.