Ringing Group - Planet VGW 10 Series User Manual

"Port Settings->Advanced Settings" configuration page to enable the corresponding port "Call
Wait" function.
The call waiting service steps are as follows (refer to "
steps; for example, B is on call waiting service):
1) A dials to B, and then B is off hook, so a session is established between A and B.
2) C dials to B, during the call, B will hear the call waiting tone.
3) B's hook flashes, and now B hears the dialing tone at which time both A and C are
waiting call.
B continues to do the following:

B dial 0: stop C.

B dial 2: connect with C.
For the port that is on call waiting service. When user's hook flashes, press number
"2", and a session is established between one user and one user. When number "2"
is pressed twice, a session is established between another user and another. Press
number "0" to stop another user, meaning to keep the current session.

5.1.4 Ringing group

Select "Port Settings->Ringing Group Settings" setting page, and you can jump to the page
for the ringing group.

By dividing the Ring Group, achieve much incoming extension parallel
ringing; can be divided up to 16 groups.

It is strongly suggested that one device's group member isn't over 16 users.
4-/8-Port SIP Internet Telephony Gateway
Figure 5-1-5 Ringing group settings
Page 43
VGW-x10 Series
Figure 5-1: Multi-party conferencing
"