Wifidog Configure - Planet VCG-1500WG-LTE User Manual

7.2 Wifidog Configure

Wifidog function is used for web authentication, when users connect to a wireless hotspot, requesting to send the data. It will
first open the authentication page under the path of configured authentication server address to allow users to authenticate after
the authentication succeeded. Then users can access Internet.
Object
Gateway ID
Web server name
Internal port
Wifidog port
The maximum number of
concurrent users
Detecing interval
User Timeout detection
times
Authentication Server
Address
Enable SSL
Figure 7-2-1 Wifidog Configuration
Description
Gateway mask which wifidog uploads messages to the server
The user-defined server name
The user data interface
The wifidog port number
the largest number of users simultaneously request
Detecting user traffic information and device status interval (s).
determining user timeout detection times
The authentication server address
Docking whether the server uses SSL decryption
53
User's Manual of VCG-1500WG-LTE