Ametek UPLC-II System Manual page 61

Software Programmable Alarms/(Outputs from I/O Board)
Output Reason:
Output Name:
(Available Outputs)
Output Type:
UPLC-II™ Condition
Transmit ON
Transmit OFF
TX / RX Alarms for ON/OFF Units with Checkback (CB) Option Only
Alarm Reason:
Alarm Name:
(Available Outputs)
Output Type:
UPLC-II™ Condition
Passed CB Test
Failed CB Test
* If a UPLC-II™ has both Major & Minor Checkback alarms, then that unit is faulty and needs to be checked.
January 2016
Table 3–3 Continued:
ON/OFF Mode
Transmit Monitor for ON/OFF Units Only
TX signal level is ≥ TX low level setting
Main RF Output (LL01 – LL10)
De-energized State
N.O. Output
Closed
Open
UPLC-II™ failed all checkback
tests performed
at the 10 W level
Checkback Major Alarm
(LL01 – LL10)
De-energized State
N.O. Output N.C. Output
Open Closed
Closed Open
Chapter 3. applications
N.C. Output
Open
Closed
UPLC-II™ failed all checkback
tests performed
at the 1 W level
Checkback Minor Alarm
(LL01 – LL10)
De-energized State
N.O. Output N.C. Output
Open Closed
Closed Open
3
Page 3–15