Appendix B: Pc Setting For Static Ip Address - Ametek UPLC-II System Manual

appendix B: Setting Static iP address

Appendix B: PC Setting for Static IP Address

1. Locate Network Connections on your PC. (See Figure below)
2. Right click and choose Properties.
3. Click on "Internet Protocol Version 4 (TCP/IPv4).
4. Click the Properties button.
5. In either the "Alternate" or "General" tab select "User Configured".
6. Enter a static IP address with last group of 3 digits different from the UPLC-II™ IP address.
7. If on a LAN also set default gateway.
B
Network and Internet Connections
January 2016
Page B–1