Ametek UPLC-II System Manual page 16

UPlC-ii™ System manual
Table 2–8. Environmental/Surge/Interface Specifications
Ambient Temperature, range of air
Relative Humidity
Altitude
Surge Withstand Capability
1 Minute withstand
Coax, center conductor to ground
Dielectric
Electrostatic Discharge (ESD)
Radiated Electromagnetic
Interference from Tranceivers
Carrier Frequency on dc Input
Leads When Transmitting 1 W
Nominal Battery
Voltage
48/60 Vdc
110/125/250 Vdc
*Not transmitting
Permissable ripple on incoming Vdc = 5%
Maximum allowable frequency of ripple = 120 Hz
Unit can also operate with 110–130 Vac input
Equipment Net Weight*
lbs
Single Unit 21
* Without redundant Power Supply or Power Amp.
Page 2–4
–30 C to +70 C (ANSI C37.90)
Up to 95% (non-condensing) at 40 C (for 96 hrs cumulative)
(ANSI C93.5)
Up to 1500 m (without de-rating), 6000 m with de-rating
Per ANSI C37.90.1
IEC 255-5 and C37.90 (500 Vdc class)
3000 V impulse level, 1.2 x 50 µs impulse, per ANSI C93.5
Per ANSI C37.90, 500 Vdc class (3,000 Vdc dielectric
withstand), IEC 60255-5
Per ANSI C37.90.3, IEC 61000-4-2
Per ANSI C37.90.2
20 mV (max.)
Table 2–9. Input Power Requirements
Permissible
Voltage Range
Range
38 to 76 Vdc
88 to 300 Vdc
Table 2–10. Weight & Dimension Specifications
Height
Kg inches mm
9.53 5.218 132.54
Standby 1 Watt 10 Watt
*
Transmit Transmit
Single
25 watts 35 watts 60 watts
20 watts 30 watts 66 watts
Width Depth
inches mm inches
17.437 444.88 13.26
Single
Rack
mm Space
336.75 3 RU