2. In the Project Settings window
simulator field and click Yes when asked if it is OK to change your target simulator to
Vivado Simulator. click OK in the Project Settings window.
X-Ref Target - Figure 4-17
3. In the Flow Navigator, under Simulation, click Run Simulation > Run Behavioral
Simulation.
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
Chapter 4: Implementing and Simulating the Design
(Figure
4-17), select Vivado Simulator in the Target
Figure 4-17: Set Simulator to Vivado Simulator
www.xilinx.com
X18478-120716
62
Send Feedback