Xilinx KCU1250 10GBASE-KR User Manual page 16

Install the Ethernet Controller Application
1. Browse to <working_dir>/kcu1250_10gbasekr_trd/software/GUI
(Figure 2-5).
X-Ref Target - Figure 2-5
Figure 2-5: Directory Location, Ethernet Controller Installer
2. Right-click either the EthernetController-32-installer (for a 32-bit operating system)
or EthernetController-64-installer (for a 64-bit operating system) and select Run as
administrator
3. Click Yes in the dialog box that opens.
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
(Figure 2-5).
www.xilinx.com
Chapter 2: Setup
X18437-120716
16
Send Feedback