Xilinx KCU1250 10GBASE-KR User Manual page 18

6. Click Close after installation is complete
X-Ref Target - Figure 2-8
To uninstall the Ethernet Controller application after design bring up, open the Control Panel. In
TIP:
the Control Panel click All Control Panel Items > Programs and Features and uninstall program
Xilinx Ethernet Controller - Powered by Xilinx.
Ready to Bring Up the Design
After all procedures in this chapter are complete, go to
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
(Figure
Figure 2-8: Installation Complete
www.xilinx.com
2-8).
X18440-120716
Chapter 3, Bringing Up the
Send Feedback
Chapter 2: Setup
Design.
18