To run a simulation in Modelsim/Questa:
1. In the Flow Navigator, under Simulation, click Run Simulation > Run Behavioral
Simulation
X-Ref Target - Figure 4-16
To run a simulation using the Vivado Design Suite Simulator:
1. In the Flow Navigator, under Project Manager, click Settings.
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
(Figure
4-16).
Figure 4-16: Run ModelSim Simulation
www.xilinx.com
Chapter 4: Implementing and Simulating the Design
X18477-120716
61
Send Feedback