Xilinx KCU1250 10GBASE-KR User Manual page 24

2. Open the connection wizard to initiate a connection to the KCU1250 board:
a. Click Open a new hardware target
X-Ref Target - Figure 3-5
b. Configure the wizard to establish connection with the KCU1250 board by selecting
the default value on each wizard page. Click Next > Next > Next > Finish.
c. In the hardware view, right-click xcku040 and click Program Device
X-Ref Target - Figure 3-6
d. In the Bitstream file field, browse to the location of the BIT file:
<working_dir>/kcu1250_10gbasekr_trd/ready_to_test/kcu1250_10gb
asekr_download.bit
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
(Figure
Figure 3-5: Open a New Hardware Target
Figure 3-6: Select Device to Program
www.xilinx.com
Chapter 3: Bringing Up the Design
3-5).
X18446-120716
Send Feedback
X18445-120716
(Figure 3-6).
24