2. The run_eyescan command becomes available after the run_eyescan.tcl file is
sourced. To initiate a scan, type run_eyescan in the Tcl console
command initiates:
Vertical and Horizontal sweeps
°
Data sample collection
°
Data sample processing to create an eye scan
°
X-Ref Target - Figure 3-19
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
Figure 3-19: The run_eyescan Command
www.xilinx.com
Chapter 3:
Bringing Up the Design
(Figure
3-19). This
X18459-120716
Send Feedback
37