Xilinx KCU1250 10GBASE-KR User Manual page 13

4. Open the control computer Device Manager. In the Windows task bar, click Start, click
Control Panel, and then click Device Manager.
5. In the Device Manager window
Silicon Labs CP210x USB to UART Bridge: Standard COM Port, and then click
Properties.
X-Ref Target - Figure 2-2
Make note of the COM port numbers assigned by the control computer OS in your setup to Silicon
TIP:
Labs CP210x USB to UART Bridge: Standard COM Port and Silicon Labs CP210x USB to UART
Bridge: Enhanced COM Port. The Enhanced COM port number must be provided to the Tera Term Pro
terminal emulator in
Controller application in
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
(Figure
Figure 2-2: Device Manager
step 2, page 15. The Standard COM port number must be provided to the Ethernet
step 2, page 31.
www.xilinx.com
2-2), expand Ports (COM & LPT), right-click
Chapter 2: Setup
X18434-120716
13
Send Feedback