Program The Fpga - Xilinx KCU1250 10GBASE-KR User Manual

b. Enter the Si570 frequency in MHz: Type 156.25 and press Enter.
6. Set the Si5368 frequency to 156.25 MHz:
a. Select option 2 (Set KCU1250 Si5368 frequency): Type 2, and press Enter.
b. Enter the Si5368 frequency in MHz: Type 156.25 and press Enter.
c. Choose Si5368 operating mode (Select Free-Run using XA-XB crystal): Type 2, and
press Enter.
7. Close the Tera Term Pro terminal program window.

Program the FPGA

1. Launch the Vivado® Integrated Design Environment (IDE) on the control computer:
a. In Windows, select Start > All Programs > Xilinx Design Tools >
Vivado 2017.1 > Vivado 2017.1.
b. On the getting started page, click Open Hardware Manager
X-Ref Target - Figure 3-4
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
Figure 3-4: Open Hardware Manager
www.xilinx.com
Chapter 3: Bringing Up the Design
(Figure 3-4).
X18444-120716
Send Feedback
23