Xilinx KCU1250 10GBASE-KR User Manual page 14

6. In the properties window, select the Port Settings tab
7. Set Bits per second, Data bits, Parity, Stop bits, and Flow control to the values shown
in Figure 2-3, and click OK.
X-Ref Target - Figure 2-3
8. In the Device Manager window
Silicon Labs CP210x USB to UART Bridge: Enhanced COM Port and then click
Properties.
9. In the properties window, select the Port Settings tab and set Bits per second, Data
bits, Parity, Stop bits, and Flow control to the values shown in
click OK.
10GBASE-KR Ethernet TRD
UG1058 (v2017.1) April 19, 2017
Figure 2-3: Port Settings
(Figure 2-2), expand Ports (COM & LPT), right-click
www.xilinx.com
Chapter 2: Setup
(Figure 2-3).
X18435-120716
(Figure 2-3), and then
Send Feedback
14