Ipv6 Dhcp Relay Server-Address - HPE FlexFabric 5950 Series Command Reference Manual

Hide thumbs Also See for FlexFabric 5950 Series:
Table of Contents

Advertisement

Views
Interface view
Predefined user roles
network-admin
Parameters
interface: Specifies the interface name mode. This mode pads the Interface-ID option in ASCII code
with the interface name and VLAN ID of the interface.
Usage guidelines
Enable the DHCPv6 relay agent on the interface before executing this command. Otherwise, the
command does not take effect.
Examples
# Specify the interface name mode as the padding mode for the Interface-ID option on
VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ipv6 dhcp relay interface-id interface

ipv6 dhcp relay server-address

Use ipv6 dhcp relay server-address to specify a DHCPv6 server on the DHCPv6 relay agent.
Use undo ipv6 dhcp relay server-address to remove DHCPv6 server addresses.
Syntax
ipv6 dhcp relay server-address ipv6-address [ interface interface-type interface-number ]
undo ipv6 dhcp relay server-address [ ipv6-address [ interface interface-type interface-number ] ]
Default
No DHCPv6 server address is specified on the DHCPv6 relay agent.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IPv6 address of a DHCPv6 server.
interface interface-type interface-number: Specifies an output interface through which the relay
agent forwards the DHCPv6 requests to the DHCPv6 server. If you do not specify an output interface,
the relay agent looks up the routing table for an output interface.
Usage guidelines
Upon receiving a request from a DHCPv6 client, the interface encapsulates the request into a
Relay-forward message and forwards the message to the specified DHCPv6 server.
You can specify a maximum of eight DHCPv6 servers on an interface. The DHCPv6 relay agent
forwards DHCP requests to all the specified DHCPv6 servers.
If the DHCPv6 server address is a link-local address or multicast address, you must specify an
output interface. If you do not specify an output interface, DHCPv6 packets might fail to reach the
DHCPv6 server.
308

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents