Ipv6 Dhcp Pool - HPE FlexFabric 5950 Series Command Reference Manual

Parameters
policy-name: Assigns a name to the DHCPv6 policy. The policy name is a case-insensitive string of 1
to 63 characters.
Usage guidelines
In DHCP policy view, you can specify address pools for different user classes. Clients matching a
user class will obtain IPv6 addresses and other parameters from the specified address pool.
For a DHCPv6 policy to take effect, you must apply it to an interface.
Examples
# Create DHCPv6 policy test and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp policy test
[Sysname-dhcp6-policy-test]
Related commands
class pool
default pool
ipv6 dhcp apply-policy
ipv6 dhcp class

ipv6 dhcp pool

Use ipv6 dhcp pool to create a DHCPv6 address pool and enter its view, or enter the view of an
existing DHCPv6 address pool.
Use undo ipv6 dhcp pool to delete the specified DHCPv6 address pool.
Syntax
ipv6 dhcp pool pool-name
undo ipv6 dhcp pool pool-name
Default
No DHCPv6 address pools exist.
Views
System view
Predefined user roles
network-admin
Parameters
pool-name: Specifies a name for the DHCPv6 address pool, a case-insensitive string of 1 to 63
characters.
Usage guidelines
A DHCPv6 address pool stores IPv6 address/prefix and other configuration parameters to be
assigned to DHCPv6 clients.
When you delete a DHCPv6 address pool, binding information for the assigned IPv6 addresses and
prefixes in the address pool is also deleted.
Examples
# Create a DHCPv6 address pool named pool1 and enter its view.
283