[Sysname-dhcp6-pool-0] remote-server 10::1
reset ipv6 dhcp relay statistics
Use reset ipv6 dhcp relay statistics to clear packets statistics on the DHCPv6 relay agent.
Syntax
reset ipv6 dhcp relay statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command clears all relay agent statistics.
Examples
# Clear packet statistics on the DHCPv6 relay agent.
<Sysname> reset ipv6 dhcp relay statistics
Related commands
display ipv6 dhcp relay statistics
DHCPv6 snooping commands
DHCPv6 snooping works between the DHCPv6 client and the DHCPv6 server or between the
DHCPv6 client and DHCPv6 the relay agent. DHCPv6 snooping does not work between the
DHCPv6 server and the DHCPv6 relay agent.
display ipv6 dhcp snooping binding
Use display ipv6 dhcp snooping binding to display DHCPv6 snooping entries.
Syntax
display ipv6 dhcp snooping binding [ address ipv6-address [ vlan vlan-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays the DHCPv6 snooping entry for the specified IPv6 address. If you
do not specify an IPv6 address, this command displays DHCPv6 snooping entries for all IPv6
addresses.
vlan vlan-id: Specifies the ID of the VLAN where the IPv6 address resides. If you do not specify a
VLAN, this command displays DHCPv6 snooping entries for the IPv6 address in all VLANs.
310