Reset Ipv6 Dhcp Server Pd-In-Use - HPE FlexFabric 5950 Series Command Reference Manual

Views
User view
Predefined user roles
network-admin
Parameters
address ipv6-address: Clears binding information for the specified assigned IPv6 address. If you do
not specify an IPv6 address, this command clears binding information for all assigned IPv6
addresses.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
clears binding information about assigned IPv6 addresses for the public network.
pool pool-name: Clears binding information for assigned IPv6 addresses in the address pool
specified by its name, a case-insensitive string of 1 to 63 characters. If you do not specify an address
pool, this command clears binding information for assigned IPv6 addresses in all address pools.
Usage guidelines
If you execute this command to clear information about an assigned static binding, the static binding
becomes a free static binding.
Examples
# Clear binding information for all assigned IPv6 addresses.
<Sysname> reset ipv6 dhcp server ip-in-use
# Clears binding information for assigned IPv6 addresses in DHCPv6 address pool 1.
<Sysname> reset ipv6 dhcp server ip-in-use pool 1
# Clears binding information for the assigned IPv6 address 2001:0:0:1::1.
<Sysname> reset ipv6 dhcp server ip-in-use address 2001:0:0:1::1
Related commands
display ipv6 dhcp server ip-in-use

reset ipv6 dhcp server pd-in-use

Use reset ipv6 dhcp server pd-in-use to clear binding information for assigned IPv6 prefixes.
Syntax
reset ipv6 dhcp server pd-in-use [ pool pool-name | [ prefix prefix/prefix-len ] [ vpn-instance
vpn-instance-name ] ]
Views
User view
Predefined user roles
network-admin
Parameters
pool pool-name: Clears binding information for assigned IPv6 prefixes in the address pool specified
by its name, a case-insensitive string of 1 to 63 characters. If you do not specify an address pool, this
command clears binding information for assigned IPv6 prefixes in all address pools.
prefix prefix/prefix-len: Clears binding information for the specified assigned IPv6 prefix. The value
range for the prefix length is 1 to 128. If you do not specify an IPv6 prefix, this command clears
binding information for all assigned IPv6 prefixes.
298