Display Ipv6 Dhcp Option-Group - HPE FlexFabric 5950 Series Command Reference Manual

Usage guidelines
In a DHCPv6 policy, the DHCPv6 server uses the default address pool to assign IPv6 address, IPv6
prefix, or other parameters to clients that do not match any user classes. If no default address pool is
specified or the default address pool does not have assignable IPv6 addresses or prefixes, the
assignment fails.
You can specify only one default address pool in a DHCPv6 policy. If you execute this command
multiple times, the most recent configuration takes effect.
Examples
# Specify the DHCPv6 address pool pool1 as the default DHCPv6 address pool in DHCPv6 policy 1.
<Sysname> system-view
[Sysname] ipv6 dhcp policy 1
[Sysname-dhcp6-policy-1] default pool pool1
Related commands
class pool
ipv6 dhcp policy

display ipv6 dhcp option-group

Use display ipv6 dhcp option-group to display information about a DHCPv6 option group.
Syntax
display ipv6 dhcp option-group [ option-group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
option-group-number: Specifies a static or dynamic DHCPv6 option group by its ID. The value range
for the option group ID is 1 to 100. If you do not specify an option group, this command displays
information about all DHCPv6 option groups.
Usage guidelines
A static DHCPv6 option group is created by using the ipv6 dhcp option-group command.
A dynamic DHCPv6 option group is created automatically by a DHCPv6 client after it obtains the
DHCPv6 configuration parameters. Dynamic option groups cannot be manually modified or deleted.
Examples
# Display information about all DHCPv6 option groups.
<Sysname> display ipv6 dhcp option-group
DHCPv6 option group: 1
DNS server addresses:
Type: Static
Interface: N/A
1::1
DNS server addresses:
Type: Dynamic (DHCPv6 address allocation)
262