HPE FlexFabric 5950 Series Command Reference Manual page 64

Syntax
display dhcp server free-ip [ pool pool-name | vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pool pool-name: Displays assignable IP addresses in the specified address pool. The pool name is a
case-insensitive string of 1 to 63 characters. If you do not specify an address pool, this command
displays all assignable IP addresses for all address pools.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
displays assignable IP addresses in address pools for the public network.
Examples
# Display assignable IP addresses in all address pools.
<Sysname> display dhcp server free-ip
Pool name: 1
Network: 10.0.0.0 mask 255.0.0.0
IP ranges from 10.0.0.10 to 10.0.0.100
IP ranges from 10.0.0.105 to 10.0.0.255
Secondary networks:
10.1.0.0 mask 255.255.0.0
IP ranges from 10.1.0.0 to 10.1.0.255
10.2.0.0 mask 255.255.0.0
IP Ranges from 10.2.0.0 to 10.2.0.255
Pool name: 2
Network: 20.1.1.0 mask 255.255.255.0
IP ranges from 20.1.1.0 to 20.1.1.255
Table 8 Command output
Field
Pool name
Network
IP ranges
Secondary networks
Related commands
address range
dhcp server ip-pool
network
Description
Name of the address pool.
Assignable network.
Assignable IP address range.
Assignable secondary networks.
54