Dhcpv6 Relay Agent Commands; Display Ipv6 Dhcp Relay Server-Address - HPE FlexFabric 5950 Series Command Reference Manual

Parameters
vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to
31 characters. If you do not specify a VPN instance, the DHCPv6 address pool belongs to the public
network.
Usage guidelines
If a DHCPv6 address pool is applied to a VPN instance, the DHCPv6 server assigns IPv6 addresses
in this address pool to clients in the specified VPN instance.
The DHCPv6 server identifies the VPN instance to which a DHCPv6 client belongs according to the
following information:
•
The client's VPN information stored in authentication modules.
•
The VPN information of the DHCPv6 server's interface that receives DHCPv6 packets from the
client.
The VPN information from authentication modules takes priority over the VPN information of the
receiving interface.
Examples
# Apply DHCPv6 address pool 0 to the VPN instance abc.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 0
[Sysname-dhcp6-pool-0] vpn-instance abc

DHCPv6 relay agent commands

display ipv6 dhcp relay server-address

Use display ipv6 dhcp relay server-address to display DHCPv6 server addresses specified on the
DHCPv6 relay agent.
Syntax
display ipv6 dhcp relay server-address [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays DHCPv6 server addresses on all interfaces enabled
with DHCPv6 relay agent.
Examples
# Display DHCPv6 server addresses on all interfaces enabled with DHCPv6 relay agent.
<Sysname> display ipv6 dhcp relay server-address
Interface: Vlan-interface2
Server address
2::3
3::4
Outgoing Interface
Vlan-interface4
303