Dns-Server - HPE FlexFabric 5950 Series Command Reference Manual

Field
Packets dropped
Packets sent
Related commands
reset ipv6 dhcp server statistics

dns-server

Use dns-server to specify a DNS server in a DHCPv6 address pool.
Use undo dns-server to remove the specified DNS server from a DHCPv6 address pool.
Syntax
dns-server ipv6-address
undo dns-server ipv6-address
Default
No DNS server address is specified.
Views
DHCPv6 address pool view
DHCPv6 option group view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IPv6 address of a DNS server.
Usage guidelines
You can use the dns-server command to specify up to eight DNS servers in an address pool. A DNS
server specified earlier has a higher preference.
Examples
# Specify the DNS server address 2:2::3 in DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] dns-server 2:2::3
Related commands
display ipv6 dhcp pool
Description
Number of packets discarded. If statistics about an address pool are
displayed, this field is not displayed.
Number of messages sent by the DHCPv6 server. The message types
include:
•
Advertise.
•
Reconfigure.
•
Reply.
•
Relay-reply.
If statistics about an address pool are displayed, this field is not displayed.
277