Default Pool - HPE FlexFabric 5950 Series Command Reference Manual

Default
No DHCPv6 address pool is specified for a DHCPv6 user class.
Views
DHCPv6 policy view
Predefined user roles
network-admin
Parameters
class-name: Specifies a DHCPv6 user class by its name, a case-insensitive string of 1 to 63
characters.
pool-name: Specifies a DHCPv6 address pool by its name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
You can specify only one DHCPv6 address pool for a DHCPv6 user class in a DHCPv6 policy. If you
execute this command multiple times for a user class, the most recent configuration takes effect.
Examples
# Specify DHCPv6 address pool pool1 for DHCPv6 user class test in DHCPv6 policy 1.
<Sysname> system-view
[Sysname] ipv6 dhcp policy 1
[Sysname-dhcp6-policy-1] class test pool pool1
Related commands

default pool

ipv6 dhcp policy
ipv6 dhcp pool
default pool
Use default pool to specify the default DHCPv6 address pool.
Use undo default pool to restore the default.
Syntax
default pool pool-name
undo default pool
Default
No default DHCPv6 address pool is specified.
Views
DHCPv6 policy view
Predefined user roles
network-admin
Parameters
pool-name: Specifies a DHCPv6 address pool by its name, a case-insensitive string of 1 to 63
characters.
261