Ipv6 Dhcp Relay Gateway; Ipv6 Dhcp Relay Interface-Id - HPE FlexFabric 5950 Series Command Reference Manual

[Sysname] ipv6 dhcp pool p1
[Sysname-dhcp6-pool-p1] gateway-list 10::1

ipv6 dhcp relay gateway

Use ipv6 dhcp relay gateway to specify a gateway address for DHCPv6 clients on the DHCPv6
relay interface.
Use undo ipv6 dhcp relay gateway to restore the default.
Syntax
ipv6 dhcp relay gateway ipv6-address
undo ipv6 dhcp relay gateway
Default
The first IPv6 address of the relay interface is used as the gateway address for DHCPv6 clients.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies a gateway address. The IPv6 address must be an IPv6 address of the relay
interface.
Usage guidelines
The DHCPv6 relay agent uses the specified IPv6 address instead of the first IPv6 address of the
relay interface as the gateway address for DHCPv6 clients.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify 10::1 as the gateway address for DHCPv6 clients on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 dhcp relay gateway 10::1
Related commands
gateway-list

ipv6 dhcp relay interface-id

Use ipv6 dhcp relay interface-id to specify a padding mode for the Interface-ID option.
Use undo ipv6 dhcp relay interface-id to restore the default.
Syntax
ipv6 dhcp relay interface-id interface
undo ipv6 dhcp relay interface-id
Default
The DHCPv6 relay agent fills the Interface-ID option with the interface index of the interface.
307