Ipv6 Dhcp Class - HPE FlexFabric 5950 Series Command Reference Manual

Usage guidelines
You can apply only one DHCPv6 policy to an interface. If you execute this command multiple times,
the most recent configuration takes effect.
Examples
# Apply the DHCPv6 policy test to VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 dhcp apply-policy test
Related commands

ipv6 dhcp class

ipv6 dhcp class
Use ipv6 dhcp class to create a DHCPv6 user class and enter its view, or enter the view of an
existing DHCPv6 user class.
Use undo ipv6 dhcp class to delete the specified DHCPv6 user class.
Syntax
ipv6 dhcp class class-name
undo ipv6 dhcp class class-name
Default
No DHCPv6 user classes exist.
Views
System view
Predefined user roles
network-admin
Parameters
class-name: Specifies a name for the DHCPv6 user class, a case-insensitive string of 1 to 63
characters.
Usage guidelines
In the DHCPv6 user class view, you can use the if-match command to configure match rules for user
classification.
Examples
# Create a DHCPv6 user class test and enter DHCPv6 user class view.
<Sysname> system-view
[Sysname] ipv6 dhcp class test
[Sysname-dhcp6-class-test]
Related commands
class pool
ipv6 dhcp policy
if-match
281