HPE FlexFabric 5950 Series Command Reference Manual page 171

IP address Routing interface
0.0.0.0 Tun1
# Display the number of IPv4 adjacency entries for the specified slot.
<Sysname> display adjacent-table slot 1 count
Total entries on slot 1: 1
Table 33 Command output
Field
IP address
Routing interface
Physical interface
Logical interface
Service type/Type
Action type
Link media type
VPN index
Virtual circuit information
Link head information(IP)
Link head information(MPLS)
Physical interface
Tun1
Description
IP address of the next hop.
•
For a P2P link, the IP address of the next hop is not needed. This field
displays 0.0.0.0.
•
For an NBMA link, the value 0.0.0.0 indicates the default adjacency
entry. Packets are forwarded through the default virtual circuit.
Output interface of the matching route entry.
Physical interface of which the outgoing packets are sent out.
Logical interface for sending the packets. If the entry has no logical
interface, this field displays N/A.
Link layer protocol type, such as PPP, HDLC, Tunnel, and MTunnel.
Packet processing type, Forwarding or Drop.
Link media type:
•
P2P—Point-to-point link.
•
NBMA—Non-broadcast multi-access link.
Index of the VPN.
Information about the virtual circuit, such as PVC or DLCI. If the entry has
no virtual circuit, this field displays N/A.
Link layer header for IPv4.
Link layer header for MPLS.
161
Type
Tunnel