Reset Ipv6 Dhcp Snooping Packet Statistics - HPE FlexFabric 5950 Series Command Reference Manual

Parameters
address ipv6-address: Clears the DHCPv6 snooping entry for the specified IPv6 address.
vlan vlan-id: Clears DHCPv6 snooping entries for the specified VLAN. If you do not specify a VLAN,
this command clears DHCPv6 snooping entries for the default VLAN.
all: Clears all DHCPv6 snooping entries.
Examples
# Clear all DHCPv6 snooping entries.
<Sysname> reset ipv6 dhcp snooping binding all
Related commands
display ipv6 dhcp snooping binding

reset ipv6 dhcp snooping packet statistics

Use reset ipv6 dhcp snooping packet statistics to clear DHCPv6 packet statistics for DHCPv6
snooping.
Syntax
reset ipv6 dhcp snooping packet statistics [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears DHCPv6 packet statistics for the master device.
Examples
# Clear DHCPv6 packet statistics for DHCPv6 snooping.
<Sysname> reset ipv6 dhcp snooping packet statistics
Related commands
display ipv6 dhcp snooping packet statistics
324