Reset Ipv6 Dhcp Server Conflict - HPE FlexFabric 5950 Series Command Reference Manual

Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
prefix-pool-number: Specifies a prefix pool by its number in the range of 1 to 128.
preferred-lifetime preferred-lifetime: Sets the preferred lifetime in the range of 60 to 4294967295
seconds. The default value is 604800 seconds (7 days).
valid-lifetime valid-lifetime: Sets the valid lifetime in the range of 60 to 4294967295 seconds. The
default value is 2592000 seconds (30 days). The valid lifetime must be longer than or equal to the
preferred lifetime.
Usage guidelines
Only one prefix pool can be applied to an address pool.
You can apply a prefix pool that has not been created to an address pool. The setting takes effect
after the prefix pool is created.
To modify the prefix pool in a DHCPv6 address pool, execute the undo prefix-pool command to
remove the prefix pool, and then execute the prefix-pool command.
Examples
# Apply prefix pool 1 to address pool 1, and use the default preferred lifetime and valid lifetime.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] prefix-pool 1
# Apply prefix pool 2 to address pool 2, and set the preferred lifetime to one day and the valid lifetime
to three days.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 2
[Sysname-dhcp6-pool-2] prefix-pool 2 preferred-lifetime 86400 valid-lifetime 259200
Related commands
display ipv6 dhcp pool
ipv6 dhcp prefix-pool

reset ipv6 dhcp server conflict

Use reset ipv6 dhcp server conflict to clear IPv6 address conflict information.
Syntax
reset ipv6 dhcp server conflict [ address ipv6-address ] [ vpn-instance vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
address ipv6-address: Clears conflict information for the specified IPv6 address. If you do not
specify an IPv6 address, this command clears all IPv6 address conflict information.
296