Display Ipv6 Dhcp Server - HPE FlexFabric 5950 Series Command Reference Manual

Field
In-use
Static
Assigned length
Total prefix number

display ipv6 dhcp server

Use display ipv6 dhcp server to display DHCPv6 server configuration information.
Syntax
display ipv6 dhcp server [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays DHCPv6 server configuration information for the
specified interface. If you do not specify an interface, this command displays DHCPv6 server
configuration information for all interfaces.
Examples
# Display DHCPv6 server configuration information for all interfaces.
<Sysname> display ipv6 dhcp server
Interface
Vlan-interface2
Vlan-interface3
# Display DHCPv6 server configuration information for the interface VLAN-interface 2.
<Sysname> display ipv6 dhcp server interface vlan-interface 2
Using pool: 1
Preference value: 0
Allow-hint: Enabled
Rapid-commit: Disabled
Table 60 Command output
Field
Interface
Pool
Using pool
Description
Number of assigned prefixes.
Number of statically bound prefixes.
Length of assigned prefixes.
Number of prefixes.
Pool
1
global
Description
Interface enabled with DHCPv6 server.
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
268