Ipv6 Dhcp Snooping Binding Record; Ipv6 Dhcp Snooping Check Request-Message - HPE FlexFabric 5950 Series Command Reference Manual

This command takes effect only after you configure the DHCPv6 snooping entry auto backup by
using the ipv6 dhcp snooping binding database filename command.
Examples
# Manually save DHCPv6 snooping entries to the backup file.
<Sysname> system-view
[Sysname] ipv6 dhcp snooping binding database update now
Related commands
ipv6 dhcp snooping binding database filename

ipv6 dhcp snooping binding record

Use ipv6 dhcp snooping binding record to enable recording of client information in DHCPv6
snooping entries.
Use undo ipv6 dhcp snooping binding record to disable the feature.
Syntax
ipv6 dhcp snooping binding record
undo ipv6 dhcp snooping binding record
Default
DHCPv6 snooping does not record client information.
Views
Layer 2 Ethernet interface/Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
This command enables DHCPv6 snooping on the port directly connected to the clients to record
client information in DHCPv6 snooping entries.
Examples
# Enable recording of client information in DHCPv6 snooping entries on HundredGigE 1/0/1.
<Sysname> system-view
[Sysname] interface hundredgige 1/0/1
[Sysname-HundredGigE1/0/1] ipv6 dhcp snooping binding record

ipv6 dhcp snooping check request-message

Use ipv6 dhcp snooping check request-message to enable the DHCPv6-REQUEST check
feature.
Use undo ipv6 dhcp snooping check request-message to disable the DHCPv6-REQUEST check
feature.
Syntax
ipv6 dhcp snooping check request-message
undo ipv6 dhcp snooping check request-message
Default
The DHCPv6-REQUEST check feature is disabled.
316