HPE FlexFabric 5950 Series Command Reference Manual page 286

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
displays DHCPv6 server statistics for the public network.
Examples
# Display all DHCPv6 packet statistics on the DHCPv6 server.
<Sysname> display ipv6 dhcp server statistics
Bindings:
Ip-in-use
Pd-in-use
Expired
Conflict
Packets received
Solicit
Request
Confirm
Renew
Rebind
Release
Decline
Information-request
Relay-forward
Packets dropped
Packets sent
Advertise
Reconfigure
Reply
Relay-reply
Table 66 Command output
Field
Bindings
Conflict
Packets received
: 1
: 0
: 0
: 0
: 1
: 1
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Description
Number of bindings:
•
Ip-in-use—Total number of address bindings.
•
Pd-in-use—Total number of prefix bindings.
•
Expired—Total number of expired address bindings.
Total number of conflicted addresses. If statistics about an address pool are
displayed, this field is not displayed.
Number of messages received by the DHCPv6 server. The message types
include:
•
Solicit.
•
Request.
•
Confirm.
•
Renew.
•
Rebind.
•
Release.
•
Decline.
•
Information-request.
•
Relay-forward.
If statistics about an address pool are displayed, this field is not displayed.
276