Reset Counters Interface Tunnel; Service - HPE FlexFabric 5950 Series Command Reference Manual

reset counters interface tunnel

Use reset counters interface tunnel to clear tunnel interface statistics.
Syntax
reset counters interface [ tunnel [ number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
tunnel [ number ]: Specifies a tunnel interface. The number argument specifies the tunnel interface
number. If you do not specify the tunnel keyword, this command clears statistics for all interfaces. If
you specify the tunnel keyword without the number argument, this command clears statistics for all
tunnel interfaces.
Usage guidelines
Use this command to clear old statistics so you can observe new traffic statistics on a tunnel
interface.
Examples
# Clear statistics for Tunnel 1.
<Sysname> reset counters interface tunnel 1
Related commands
display interface tunnel

service

Use service to specify a traffic processing slot for a tunnel interface.
Use undo service to restore the default.
Syntax
service slot slot-number
undo service slot
Default
No traffic processing slot is specified for a tunnel interface. Traffic on a tunnel interface is processed
on the slot at which the traffic arrives.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID.
Usage guidelines
Specify a traffic processing slot if a feature (for example, IPsec antireplay) requires that all traffic on
a tunnel interface be processed on the same slot.
337