Display Ipv6 Dhcp Relay Statistics - HPE FlexFabric 5950 Series Command Reference Manual

Interface: Vlan-interface3
Server address
2::3
3::4
# Display DHCPv6 server addresses on VLAN-interface 2.
<Sysname> display ipv6 dhcp relay server-address interface vlan-interface 2
Interface: Vlan-interface2
Server address
2::3
3::4
Table 67 Command output
Field
Server address
Outgoing Interface
Related commands
ipv6 dhcp relay server-address
ipv6 dhcp select

display ipv6 dhcp relay statistics

Use display ipv6 dhcp relay statistics to display DHCPv6 packet statistics on the DHCPv6 relay
agent.
Syntax
display ipv6 dhcp relay statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays DHCPv6 packets statistics on all interfaces enabled
with DHCPv6 relay agent.
Examples
# Display DHCPv6 packet statistics on all interfaces enabled with DHCPv6 relay agent.
<Sysname> display ipv6 dhcp relay statistics
Packets dropped
Packets received
Solicit
Request
Confirm
Outgoing Interface
Vlan-interface4
Outgoing Interface
Vlan-interface4
Description
DHCPv6 server address specified on the DHCP relay agent.
Output interface of DHCPv6 packets. If no output interface is specified,
the device searches the routing table for the output interface.
: 4
: 14
: 0
: 0
: 0
304