HPE FlexFabric 5950 Series Command Reference Manual page 173

IPv6 address
N/A
# Display the number of IPv6 adjacency entries for the specified slot.
<Sysname> display ipv6 adjacent-table slot 1 count
Total entries on slot 1: 1
Table 34 Command output
Field
IPv6 address
Routing interface
Physical interface
Logical interface
Service type/Type
Action type
Link media type
VPN index
Virtual circuit information
Link head information(IPv6)
Routing interface
Tun1
Description
IPv6 address of the next hop.
•
For a P2P link, the IPv6 address of the next hop is not needed. This
field has the value 0::0, and displays N/A.
•
For an NBMA link, the value 0.0.0.0 indicates a default adjacency
table. Packets are forwarded through the default virtual circuit.
Output interface of the matching route entry.
Physical interface of which the outgoing packets are sent out.
Logical interface that sends the packets. If the entry has no logical
interface, this field displays N/A.
Link layer protocol type, such as PPP, HDLC, Tunnel, and MTunnel.
Packet processing type, Forwarding or Drop.
Link media type:
•
P2P—Point-to-point link.
•
NBMA—Non-broadcast multi-access link.
Index of the VPN.
Information about the virtual circuit, such as PVC or DLCI. If the entry has
no virtual circuit, this field displays N/A.
Link layer header for IPv6.
163
Physical interface
Tun1
Type
Tunnel