Gateway-List - HPE FlexFabric 5950 Series Command Reference Manual

Field
Information-request
Relay-forward
Relay-reply
Packets sent
Advertise
Reconfigure
Reply
Relay-forward
Relay-reply
Related commands
reset ipv6 dhcp relay statistics

gateway-list

Use gateway-list to specify gateway addresses for DHCPv6 clients in a DHCPv6 address pool.
Use undo gateway-list to remove gateway addresses from a DHCPv6 address pool.
Syntax
gateway-list ipv6-address&<1-8>
undo gateway-list [ ipv6-address&<1-8> ]
Default
No gateway address is specified in a DHCPv6 address pool.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
ipv6-address&<1-8>: Specifies a space-separated list of up to eight addresses.
Usage guidelines
DHCPv6 clients of the same access type can be classified into different types by their locations. In
this case, the relay interface typically has no IPv6 address configured. You can use the gateway-list
command to specify gateway addresses for clients matching the same DHCPv6 address pool.
Upon receiving a DHCPv6 Solicit or Request from a client that matches a DHCPv6 address pool, the
relay agent processes the packet as follows:
•
Fills the link-address field of the packet with a specified gateway address.
•
Forwards the packet to all DHCPv6 servers in the matching DHCPv6 address pool.
The DHCPv6 servers select a DHCPv6 address pool according to the gateway address.
Examples
# Specify the gateway address 10::1 in the DHCPv6 address pool p1.
<Sysname> system-view
Description
Number of received information request packets.
Number of received relay-forward packets.
Number of received relay-reply packets.
Number of sent packets.
Number of sent advertise packets.
Number of sent reconfigure packets.
Number of sent reply packets.
Number of sent Relay-forward packets.
Number of sent Relay-reply packets.
306