Log Destinations; Default Output Rules For Logs; Default Output Rules For Diagnostic Logs; Default Output Rules For Security Logs - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

Severit
y value
3
4
5
6
7

Log destinations

The system outputs logs to the following destinations: console, monitor terminal, log buffer, log host,
and log file. Log output destinations are independent and you can configure them after enabling the
information center.

Default output rules for logs

A log output rule specifies the source modules and severity level of logs that can be output to a
destination. Logs matching the output rule are output to the destination.
output rules.
Table 7 Default output rules
Destination
Console
Monitor terminal
Log host
Log buffer
Log file

Default output rules for diagnostic logs

Diagnostic logs can only be output to the diagnostic log file, and cannot be filtered by source
modules and severity levels.
Table 8 Default output rule for diagnostic logs
Destination
Diagnostic log file

Default output rules for security logs

Security logs can only be output to the security log file, and cannot be filtered by source modules and
severity levels.
Level Description
Error Error condition. For example, the link state changes.
Warning condition. For example, an interface is disconnected, or the memory
Warning
resources are used up.
Normal but significant condition. For example, a terminal logs in to the device,
Notification
or the device reboots.
Informational message. For example, a command or a ping operation is
Informational
executed.
Debugging Debug message.
Log source modules
All supported modules
All supported modules
All supported modules
All supported modules
All supported modules
Table 8
Log source modules
All supported modules
Table 9 shows the default output rule for security logs.
Output switch
Enabled
Disabled
Enabled
Enabled
Enabled
shows the default output rule for diagnostic logs.
Output switch
Enabled
67
Table 7 shows the default log
Severity
Debug
Debug
Informational
Informational
Informational
Severity
Debug