Cli\Filters\Proto Menu Command; The Cli\Ifeatures Menu; Cli\Ifeatures\Iqos\Wlan1 (Or \Wlan2 Or \Wlan3) Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

See also
MAC Dir Filter menu command (Page 152)
5.7.6.3

CLI\FILTERS\PROTO menu command

Protocol filters
With the commands in this menu, you set the protocol filter properties.
CLI\FILTERS\PROTO>
Command
clearall
statprot <F|B>
fltprot <E|D>
add <Pattern>
[description]
edit <Index> [E|D]
[Pattern]
[description]
delete <Index>
clearall
See also
Protocol Filter menu command (Page 152)
5.7.7

The CLI\IFEATURES menu

5.7.7.1

CLI\IFEATURES\IQOS\WLAN1 (or \WLAN2 or \WLAN3) menu command

Note
This function is not available in firmware version 3.2.
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
Description
Deletes all entries for the protocol filter. ᅳ
The selected protocols are forwarded /
not forwarded.
Enables / disables the protocol filter.
Adds a new entry. A hexadecimal
value is expected for the "Pattern"
value. The user can enter a short note
for this protocol as the description.
Changes of enables / disables the filter
entry.
Deletes the filter entry.
Deletes all entries from the table.
Configuration / project engineering
5.7 Configuration with the Command Line Interface
Comment
IWLAN/ W744 W746 W747 W78x W78x
PB LINK
ᅳ
ᅳ ᅳ
ᅳ ᅳ
ᅳ ᅳ
ᅳ ᅳ
ᅳ ᅳ
ᅳ ᅳ
RR
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
211