Mounting With Mounting Plate; Fitting The Mounting Plate To A Wall - Siemens SCALANCE W786-xPRO Operating Instructions Manual

3.4

Mounting with mounting plate

3.4.1

Fitting the mounting plate to a wall

Drilling template
The location of the holes for fitting the mounting plate to a wall is shown in the following
figure:
Figure 3-7
Procedure
Secure the mounting plate to the wall with four screws. The screws are not supplied with the
device. The type and length of the screws depend on the type of wall.
Type of screw:
● for wooden walls: wood screw 4 x 30 mm
● for concrete walls: 4 x 50 mm with 5 mm concrete plug
● for metal walls: M4 x 25 mm with machine thread in the wall
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
46 160
Drilling template for fitting the mounting plate to a wall
3.4 Mounting with mounting plate
46
Assembly
37