2.6
Reset button
Functions of the reset button
The reset button is located below the housing cover beside the sockets for external
antennas.
Figure 2-8
The reset button has the following functions:
● Restart of the device
● Loading new firmware
● Restoring the default parameters (factory defaults)
● Adopting the configuration data from the PRESET PLUG.
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
Position of the reset button with the housing cover removed
To restart the device, press the reset button.
If the normal procedure with the Load & Save menu of Web Based Management was
completed successfully, the reset button can be used to load new firmware. This situation
can occur if there was a power outage during the normal firmware update.
Description
2.6 Reset button
27