Siemens SCALANCE W786-xPRO Operating Instructions Manual page 190

Configuration / project engineering
5.7 Configuration with the Command Line Interface
adhoc [E|D]
anyssid [E|D]
vapno [0 ... 7]
outdoor [E|D]
802.11G
ADVANCED
DATARATES
VAP1
VAP2
VAP3
VAP4
VAP5
VAP6
VAP7
5.7.3.3 CLI\INTERFACES\WLAN1\ADVANCED (or \WLAN2\ADVANCED or
\WLAN3\ADVANCED) menu command
Configuring transmission characteristics
With the commands in this menu, you specify the parameters for the transmission
characteristics such as the size at which a packet is fragmented or the antenna(s) to be
used.
190
Select ad hoc or infrastructure
mode.
With ANY SSID, the client
connects to the best access
point in the environment in which
it is permitted to connect.
Specifies the number of virtual
access points.
Enable / disable outdoor AP
mode.
Opens the "ADVANCED G"
menu (802.11g).
Opens the "ADVANCED" menu.
Opens the "DATARATES"
menu.
Opens the "VAP1" menu.
Opens the "VAP2" menu.
Opens the "VAP3" menu.
Opens the "VAP4" menu.
Opens the "VAP5" menu.
Opens the "VAP6" menu.
Opens the "VAP7" menu.
Comment
Available only in the client mode.
Not with iPCF.
ᅳ ✔ ✔
Available only in the client mode.
Not with iPCF.
✔ ✔ ✔
ᅳ ᅳ ᅳ
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
ᅳ ᅳ ᅳ
Displayed only when vapno > 0.
ᅳ ᅳ ᅳ
Displayed only when vapno > 1.
ᅳ ᅳ ᅳ
Displayed only when vapno > 2.
ᅳ ᅳ ᅳ
Displayed only when vapno > 3.
ᅳ ᅳ ᅳ
Displayed only when vapno > 4.
ᅳ ᅳ ᅳ
Displayed only when vapno > 5.
ᅳ ᅳ ᅳ
Displayed only when vapno > 6.
ᅳ ᅳ ᅳ
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
✔ ✔ ✔
✔ ✔ ✔
ᅳ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
SCALANCE W786-xPRO