Cli\Security\Basic\Wlan1 (Or \Wlan2 Or \Wlan3) Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

CLI\SECURITY>
Command Description
mgmteth [E|D]
Configuration of the SCALANCE W-700 is:
D
See also
Security menu command (Page 123)
5.7.4.2

CLI\SECURITY\BASIC\WLAN1 (or \WLAN2 or \WLAN3) menu command

Security settings of the SCALANCE W-700
With the commands in this menu, you specify the security settings of the SCALANCE W-
700.
CLI\SECURITY\BASIC\WLAN1> (or \WLAN2 or \WLAN3)
Command
authent
[0|1|2|3|4|5|6|7|8]
encrypt [E|D]
cipher
[OFF|AUTO|WEP|AES|TKI
P]
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
E Possible only over the
wired Ethernet port.
Possible over all
interfaces
Description
Specifies the authentication type. For
the parameter n, enter a number
between 0 and 4 for the
authentication type:
0 Open System
1 Shared Key
2 WPA (RADIUS)
3 WPA-PSK
4 802.1x (RADIUS)
5 WPA2
6 WPA2-PSK
7 WPA-Auto
8 WPA-Auto-PSK
Encryption enabled / disabled.
Specifies the encryption scheme.
Configuration / project engineering
5.7 Configuration with the Command Line Interface
Comment
IWLAN/ W744 W746
PB LINK
ᅳ ✔ ✔
Comment
IWLAN/ W744 W746 W747 W78
PB LINK
✔ ✔ ✔
With the authentication types 7 (WPA-Auto) and 8
(WPA-Auto-PSK), the encryption method of
WPA and WPA2 or of WPA-PSK & WPA2-PSK
must be the same.
Not with iPCF
✔ ✔ ✔
✔ ✔ ✔
W747 W78x W78x
RR
✔ ✔ ✔
W78x
x RR
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
197