Cli\System\Ip Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

<IP|Name>
password [admin|user]
[password]
5.7.2.2

CLI\SYSTEM\IP menu command

IP address assignment
With the commands in this menu, you specify how the device obtains its IP address.
CLI\SYSTEM\IP>
Command
dhcp [E|D]
dhcptype [M|N|C]
clientid
ip [IP address]
subnet [subnet mask]
gateway [IP address]
ttl [TTL value]
See also
IP Settings menu command (Page 100)
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
-c (counter) for the number n of
ICMPs
-s stops the connection test for all
devices
Specifies a password for access
to the device.
Description
Enable / disable DHCP server.
Specifies how a device will be
identified:
M MAC address
N Device name
C Client ID
Specifies a client-ID for the
device.
Specifies the IP address for the
SCALANCE W7xx.
Specifies the subnet mask.
Specifies the IP address of the
router.
Sets the TTL (Time To Live)
parameter.
Configuration / project engineering
5.7 Configuration with the Command Line Interface
Comment
✔ ✔ ✔
Maximum of 31 characters.
✔ ✔ ✔
Comment
IWLAN/ W744 W746
PB LINK
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
When you enter a valid IP address, enabled DHCP is
automatically disabled.
ᅳ ✔ ✔
ᅳ ✔ ✔
ᅳ ✔ ✔
Default value: 64
ᅳ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
W747 W78x W78x
RR
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
175