Siemens SCALANCE W786-xPRO Operating Instructions Manual page 168

Configuration / project engineering
5.6 Configuration with Web Based Management
With the "Print graph" button, it is easy to print the table. You will, however, need to make
certain settings in the browser.
● Mozilla Firefox 1.5:
● Microsoft Internet Explorer 6.0:
The signal recorder itself does not cause any significant load in the network that could affect
other processes.
Both parts of the signal recorder can be operated independently.
Below, you will find a few tips that will help you to obtain useful measurements with the
signal recorder:
● Use a fixed data rate in the configuration.
● Where possible, the ipcf mode with as low an update time as possible should be set for
● Make sure that there is enough data communication during the measurement because
● The measurement setup should be run through 2-3 times with the same parameters to
● Selective measurements at a fixed position should be made over a certain time.
168
In the "File" => "Page setup..." dialog, make sure that the "Print Background (colors &
images) check box is enabled in the "Options" group box.
In "Tools" => "Internet Options" => "Advanced", the "Print background colors and images"
check box must be enabled under "Printing".
the measurements.
the statistics functions evaluate incoming frames.
find out whether losses of signal strength always occur at the same position.
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
SCALANCE W786-xPRO