Client List Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

Configuration / project engineering
5.6 Configuration with Web Based Management
5.6.9.5

Client List menu command

Note
This menu command is available only in access point mode.
Logged-on clients
All the clients logged on at the SCALANCE W78x along with certain additional information
(wireless channel, status etc.) are displayed here.
● MAC Address
● If#
● Signal
● Age
● Sec
● Channel.
● State
158
the MAC address of the client.
This specifies the wireless interface over which the client is connected.
The signal strength of the client. The higher the value, the better the signal. The user can
choose between percentage and dBm.
Displays the time that has elapsed since the last client activity was detected.
This indicates which encryption is active.
The current channel over which the client communicates with the SCALANCE W78x.
The current state of the clients. Associated means that the client is logged on.
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
SCALANCE W786-xPRO